The semi-wet material pulverizer
is also called a high-humidity material pulverizer, which can be adjusted within a certain range according to the user's needs. The semi-wet material pulverizer has a two-layer pulverizing system, which can make the pulverized material finer and can reach less than 3 mm; and the semi-wet material pulverizer has low requirements on materials, and the water range can reach 35%, especially for fermentation. The organic effect is better.
The allowable value of the semi-wet material pulverizer for the biological fermented organic fertilizer material reaches 25-50%, which can shorten the production cycle of organic fertilizer and compound fertilizer
and save cost, and is an indispensable equipment for the organic fertilizer production line
The principle of semi-wet material pulverizer:
Semi-wet material pulverizer is professional pulverizing equipment for professional pulverizing high humidity and multi-fiber materials. The semi-wet material pulverizer uses a high-speed rotating blade to pulverize the fiber with good particle size and high pulverization efficiency. The semi-wet material pulverizer is mostly used in the production and processing of organic fertilizer and the smashing of chicken manure, humic acid and other raw materials has a good effect.
The semi-wet material pulverizer adopts the two-stage rotor up and down two-stage pulverization, and the material passes through the upper-stage rotor pulverizer to form fine particles, and then is transported to the lower-stage rotor to continue pulverization into fine powder to achieve the best effect of the powder material and the hammer powder. Finally, the discharge port is directly discharged.
The semi-wet material pulverizer is not designed with a sieve mesh bottom, and more than 100 kinds of materials can be pulverized and never blocked. Even materials that have just been taken from the water can be crushed, and will not be clogged by the wet material, causing the motor to burn out and affecting production.
The semi-wet material pulverizer adopts a high-alloy wear-resistant hammer head. The hammer piece is made of forged, which is particularly strong and wear-resistant. It is stronger and more wear-resistant than the ordinary hammer head, which increases the service life of the hammer.
The semi-wet material pulverizer adopts the two-way lashing technology. If the hammer is worn, it does not need to be repaired, and the position of the moving hammer can be used continuously. The material size of the material can be controlled by adjusting the gap between the hammer and the liner.
The semi-wet material pulverizer uses high-tech technology and can be easily operated by only one person, which is not only safe and reliable, but also easy to maintain.
The semi-wet material pulverizer concentrates the lubrication system into the oil. Under normal work, the lubricant can be injected without stopping the machine.
The use range of semi-wet material pulverizer:
Semi-wet material pulverizer is widely used in dry branches, straw, sludge, biogas residue, fertilizer and so on. In addition, the specific use range of the new semi-wet material pulverizer is:
(1) Dryness of animal manure such as chicken manure, pig manure, cow dung, etc., after wet fermentation;
(2) Drying of dry organic matter of sludge organic matter;
(3) Crushing of biogas residue in biogas pool;
(4) The crushing of urban domestic garbage, and has a good grinding effect on the glass, broken ceramics and bricks inside;
(5) The dried vine has a pulverizing function.