Half-wet material crusher is the machine using advanced smashing technology at home and abroad, which has been researched,improved and manufactured by our factory based on many years of production experience,this machine completely solves the crushing problem of organic matter with high water content,it is national initiative and has been declared the national patent.The successful development of the half-wet material crusher has played an important role in shortening the production process of fermentation for compost and organic fertilizer production, it also can reduce the machine investment and save the operation cost.
The half-wet material crusher machine allows the moisture content of fermented organic fertilizer material between 20-50%. Its crushing granularity is able to reach the requirements of granulation, also can be adjusted in a certain range according to the client’s requirements. It has played a role in crushing hard materials such as glass,ceramics,brick and gravel in the organic waste,and municipal solid waste,so as to achieve the safety use effect.This is an ideal machine for fertilizer production and processing factories.
This machine can be divided into four parts:
1. Rack part: All mechanical operations are inseparable from a solid rack.The machine frame is all welded with high carbon steel plate and channel steel, and pass strict product certification and specific technical requirements, to achieve the purpose of use of the machine.
2. Rotor crushing part: Rotor of the machine is with innovative structure and reasonable design.We adopt the upper and lower sets of rotor blade as the broken part, so the crushing effect is twice better than the other products. Materials enter the crushing chamber through the inlet,then continuous grinded by the double blades and the broken plate,so that the materials can achieve granulation requirements.
3. Crushing plate adjustment device: By adjusting the distance between the broken plate and the rotor blades, the fineness and output of the crushing material can be controlled.
4. Transmission connection part: The machine uses a flexible belt to drive. It is driven by the motor to pulley, belt, then directly transmit to the spindle, rotating the spindle at a high speed, finally achieve crushing effect.