PRODUCTS List+
Industry Info

Scrap standard for vulnerable parts of fertilizer dryer equipment

2021/02/08
As the drying equipment of NPK production line, some parts of rotary drum dryer are easy to wear in the long-term use process, and the scrapped parts should be replaced in time, so as not to affect the fertilizer production. So when should these vulnerable parts be replaced?

Scrap standard of some vulnerable parts of fertilizer dryer

fertilizer dryer equipment
1. The wear of bearing bush of drum dryer is more than 1 / 3 of its thickness.

2. The wear amount of the pinion surface of the fertilizer dryer should not be more than 30% of the tooth thickness, and the wear amount of the big gear ring should be more than 25% of the tooth thickness. It can be used upside down, and it should be scrapped when it is ground to 1 / 2.

3. The distortion of the rim of the gear ring of the fertilizer dryer should not be greater than 7.5mm. This will not affect the drying of the particles from the rotary drum granulator.

4. When the hollow shaft of the fertilizer dryer produces grooves, spots or a part of its inner surface is worn through, the hollow shaft should be changed when it is deformed or cracked.
Products
Tel
contact
inquiry