The reasons for the slow operation of organic fertilizer equipment may involve multiple aspects. The following are some common causes and solutions:
Wear of mechanical components of equipment: Improper installation or design flaws of friction parts, such as too small or too large bearing clearance, can lead to poor lubrication, increase friction, and deteriorate the operating condition. Regularly inspect and adjust the clearance of the friction parts, and replace the worn parts in time to ensure that the equipment is in good operating condition.
2. Material property issues: Both excessively high and low moisture content in materials can affect the operational efficiency of the equipment. For instance, excessive moisture content may cause materials to adhere to the interior of the equipment, affecting the efficiency of crushing and conveying. Adjust the moisture content of the materials to an appropriate range, strengthen the pretreatment of the materials and remove impurities.
3. Equipment blockage: If the moisture content of the material is high or it contains hard impurities, it is easy to block the equipment passage, resulting in poor operation. Regularly clean the interior of the equipment to ensure the unobstructed passage of materials.
4. Insufficient lubrication: Insufficient supply of lubricating oil or aging of lubricating oil will lead to increased friction among mechanical components and reduced operational efficiency of the organic fertilizer production line. Regularly check the oil level and quality of the lubricating oil, and add or replace it in time.
5. Improper operation: If the feeding speed is too fast, it will cause excessive load on the equipment and affect the operational efficiency. Control the feeding speed and avoid feeding too fast.
6. Insufficient equipment maintenance: The equipment has not been maintained for a long time, resulting in problems such as loose and worn components. Formulate a detailed equipment maintenance plan, regularly inspect and maintain the equipment, and promptly identify and solve problems.
Through the above measures, the problem of slow operation of organic fertilizer equipment can be effectively solved, improving production efficiency and the service life of the equipment.
