To increase the pelletizing rate of organic fertilizer ball shaping machines, the following aspects can be considered:
1. Optimize raw material ratio and pretreatment: Based on product requirements and raw material characteristics, determine the optimal raw material ratio through experiments to ensure the adhesion and plasticity between raw materials. For raw materials with poor adhesiveness, an appropriate amount of binder can be added to enhance the bonding force between particles. Crush the raw materials to the appropriate particle size and remove particles that are too large or too small through screening to ensure uniform particle size of the raw materials.
2. Adjust equipment parameters: According to the characteristics of raw materials and product requirements, adjust the Angle and rotational speed of the disc. Adjust the position of the water spray head and the water spraying method to ensure that the water is evenly sprayed on the raw materials. According to the characteristics of raw materials and granulation requirements, precisely control the amount of water added. Excessive moisture can cause the particles to be too large or stick together, while insufficient moisture makes it difficult for the particles to form.
3. Equipment maintenance and care: Regularly inspect all components of the circular polishing machine, including the disc, transmission device, water spraying system, etc., to ensure that the equipment is in good condition. If any malfunction or wear is found in the organic fertilizer equipment, timely maintenance or replacement of components should be carried out to avoid affecting the granulation effect and pelletizing rate.
4. Operation process control: Adopt a uniform and continuous feeding method to prevent the accumulation or uneven distribution of raw materials within the disc. According to the processing capacity of the disc and the granulation requirements, the feeding speed should be reasonably controlled to ensure that the raw materials have sufficient processing time within the disc.
Through the above measures, the pelletizing rate of the organic fertilizer throwing machine can be effectively increased, and the production efficiency and product quality can be improved
