The reasons why the organic fertilizer crusher does not discharge are as follows:
1. Feed port problem: The oblique feed port is not conducive to feeding, and the straight port can increase the center of gravity of the feed, making the material feed faster. Feeding too fast will cause material accumulation, increase the load of the organic fertilizer equipment, and thus cause the material not to discharge. Adjust the design of the feed port. Ensure smooth feeding. Control the feed speed to avoid feeding too fast.
2. Material characteristics problem: Materials with too high humidity are easy to adhere to the inside of the equipment, causing blockage. The material contains large impurities, fibrous substances or the material particles are too large, which is easy to form blockage in the feed port or the crushing chamber. Control the humidity of the material and avoid using too wet materials. Remove large impurities and foreign matter in the material before the material enters the crusher.
3. Equipment design and wear problems: A rotor disc that is too large may reduce the size of the crushing chamber, causing the material to wrap more when it moves in a circular motion, resulting in the problem of not discharging. Choose equipment with reasonable design and reliable quality. Regularly check and replace worn hammers or blades.
4. Discharge port problem: Discharge port blockage or unreasonable design will cause the material to be unable to be discharged smoothly, affecting the normal operation of the equipment. Clean the discharge port regularly to ensure smooth discharge.
5. Improper operation: Too much or too little feeding, inappropriate feeding angle, etc. may lead to the problem of no discharge. Strictly follow the operating procedures of the equipment to avoid problems caused by improper operation.
Through the above analysis, we can find the reasons why the organic fertilizer crusher does not discharge, and take corresponding solutions to ensure the normal operation of the equipment.
