The maintenance of the cutting tools of the organic fertilizer crusher is the key to ensuring the efficient operation of the equipment and extending its service life. The following are specific maintenance methods and suggestions:
1. Regular cleaning and inspection: After each use, the residues inside the crusher and on the blades must be thoroughly cleaned to prevent corrosion and scale accumulation from damaging the blades. Regularly inspect the wear of the cutting tools. If obvious wear, deformation or notches are found on the tools, they should be ground, repaired or replaced in a timely manner.
2. Lubrication and Maintenance: Regularly add an appropriate amount of lubricating oil to the cutting tools and their peripheral components to reduce friction and minimize wear. Regularly inspect and tighten the fixing bolts of the cutting tools to prevent loosening and affect operation.
3. Tool grinding and replacement: For tools that can be ground, regular grinding can restore their sharpness, thereby enhancing the crushing efficiency. When grinding, attention should be paid to controlling the Angle and force well to ensure the balance of the cutting tool. When the cutting tools wear to a certain extent and affect the crushing effect, they need to be replaced in time.
4. Operating environment and material pretreatment: Excessive humidity not only leads to material adhesion but also increases tool wear. Therefore, try to dry the materials as much as possible before use. Before putting the materials into the crusher, make sure to remove hard impurities such as stones and metals to avoid accidental damage to the cutting tools.
5. Select appropriate tool materials: Choosing tool materials with good wear resistance, such as high cobalt alloy steel and cemented carbide, can effectively reduce the wear rate and improve the efficiency of tool usage.
Through the above maintenance measures, the service life of the cutting tools of the organic fertilizer crusher can be effectively prolonged, the production efficiency of the organic fertilizer production line can be improved, and the production cost can be reduced.
