At present, although the technical level has advanced, all kinds of mechanical structures have been greatly improved, but there will still be abnormal problems. Among them, the use of organic fertilizer equipment, what are the common problems, how to deal with it?
1, under normal circumstances, the finished product processed by the organic fertilizer granulator should be granular and can be easily transported or stored. However, in practical applications, the finished product often does not form a ball or cake. The cause of this phenomenon may be insufficient supply, or it may be that the gap between equipment components is too large. If the personnel want to solve it, it is necessary to adjust the parts and supply the corresponding materials according to the equipment processing capacity.
2, in addition, sometimes the finished products processed by the organic fertilizer production line can not be directly put into use, and even sometimes used in agricultural planting, which will cause crop burning phenomenon, leading to bad results. This is mostly due to problems with the equipment fermentation system. Personnel need to check its fermentation system in time, or repeat fermentation to improve the treatment effect.
3, personnel processing material moisture content is too high, equipment setting extrusion strength is not enough, will lead to equipment processing finished products do not drop ball. In order to avoid this phenomenon, personnel are required to regulate their own operations as much as possible, usually do a good job of inspection and maintenance of the equipment, while using to understand the precautions, etc., to create a good appreciation space for the later period.
