Organic fertilizer dryer in organic fertilizer production line is one of the important equipment, but it is also prone to some common failures. The following are some common faults and troubleshooting methods:
1. The dryer does not discharge material: it may be caused by too wet material, and the material can be dried and then dried; If the wind speed is too high, adjust the fan speed.
2. Dryer vibration: may be caused by the unstable installation of organic fertilizer equipment, need to check and strengthen the equipment; Or uneven material distribution caused by the need to adjust the material distribution.
3.The noise of the dryer is too large: it may be caused by bearing wear, and the bearing needs to be replaced; Or the fan blade is deformed and needs to be replaced.
4. Dryer temperature is too high: may be caused by small air volume or high wind speed, need to adjust the fan speed; Or the material water content is too high, need to dry the material and then dry.
5. Dryer leakage: may be caused by seal damage, need to replace the seal; Or the material contains impurities caused by the need to clean the material.
The above are some common faults and troubleshooting methods, but the specific situation also needs to be analyzed and processed according to the actual situation. If you encounter problems that cannot be solved, it is recommended to contact professionals in time for maintenance.
