What should be paid attention to in the maintenance of fertilizer equipment?
In order to better use the equipment in the NPK fertilizer production line, it is very important to maintain the maintenance of the compound fertilizer production equipment. Below we will focus on the maintenance points of compound fertilizer production equipment:
1. The shaft in the compound fertilizer production equipment bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life.
2. The newly installed tires are prone to loosening and must be inspected frequently.
3. Pay attention to check the wear level of the wear parts of the compound fertilizer production equipment, and always pay attention to replace the worn parts.
4. The bottom plane of the movable device of the compound fertilizer production equipment should remove dust and other debris so as to prevent the movable bearing from moving on the chassis when the machine encounters materials that cannot be broken, resulting in serious accidents.
5. If the rotating gear in the compound fertilizer production and production equipment is in operation, it should stop and check immediately and eliminate it.
Several ways to reduce the energy consumption of fertilizer equipment
1. Wrap the toilet paper on the filter. Wrapping toilet paper on diesel oil and oil filter can improve oil cleanliness and reduce oil consumption.
2. Install a negative pressure valve. The installation of the negative pressure valve can reduce the gas raincoat force in the crankcase of the diesel engine, prevent the oil from seeping and smoldering, extend the oil life cycle and reduce the oil consumption.
3. Use a fuel-saving and smoke-reducing device. The fuel-saving smoke reducer is vertically fixed in the front end oil passage of the fuel injection pump, and the DC electric appliance is connected. Used on gasoline and diesel engines, it can save 3~5% of fuel.
4. Install the inertia booster.
5, return to the oil pipe diversion. If the return pipe is connected to the high pressure oil pipe, the oil is used to enter the low pressure oil circuit, and the fuel saving effect is good.