How to deal with vibration problem in the use of organic fertilizer granulator?
Organic fertilizer granulator machine is the core equipment in the organic fertilizer production line. If there is any problem with the granulator, we must solve it immediately, otherwise it will affect the smooth production of the whole organic fertilizer production line. In the use process, the organic fertilizer granulator has vibration problem, what should we do? The following organic fertilizer equipment manufacturers will explain the solution.
(1) When a large amount of raw materials are put into operation, it may cause too much pressure on the machine, which may cause vibration of the cylinder which has not yet been opened. Rotary drum granulator, organic fertilizer granulator, dryer these heavy fertilizer equipment should pay attention to start-up commissioning.
(2) If the raw materials selected in the production do not meet the requirements of fertilizer production process, the granulation will not succeed or even damage the equipment in the production process, which will not only cause vibration, but also affect the service life of the equipment
(3) When choosing organic fertilizer granulator, you must pay attention to its granulation principle. If you encounter technical problems that can not be solved in production, you can also directly consult our professionals to help you solve the problems.
The granulation process of pig manure organic fertilizer, sludge bio organic fertilizer, organic microbial fertilizer, livestock manure, cow manure, chicken manure and industrial waste residue were studied.
In short, the production of organic fertilizer should first determine the main materials according to the local resource conditions and the purpose of composting, and then select the auxiliary materials according to the nature of the main materials. When the main material is high-carbon raw materials, appropriate high-nitrogen raw materials should be selected for adjustment; when the main material is high-nitrogen raw materials, appropriate high-carbon raw materials should be selected for adjustment.