1, the new type organic fertilizer granulator should be installed on a solid, flat ground, keep stable, to prevent vibration damage to the machine.
2. Before operation, check and confirm that each component is securely connected, safe and reliable, without abnormal wear, and the safety device is complete and effective.
3. Put the organic waste that needs to be granulated into the feed port, and adjust the feed amount reasonably according to different materials.
4, before starting, check whether the various lubrication points and chain tensioner on the organic fertilizer equipment have been filled with lubricating oil.
5, after the machine starts, it should be idled for a period of time to confirm the normal operation of the machine before being put into production.
6, in the production process, it is strictly prohibited to enter the pelletizer around to prevent accidents.
7. Regularly clean the residual materials inside the pelletizer to ensure that there are no residual materials inside the equipment to avoid damage to the machine.
8, in the operation process should pay attention to observe the operation of the machine, if found abnormal should stop in time to check and deal with.
9. After use, the power supply should be turned off and the equipment should be wiped clean, and the daily maintenance work of the organic fertilizer production line should be done.
The above is the correct operation steps of the new organic fertilizer granulator, and I hope that you can strictly comply with it in the operation process to ensure the normal operation and production safety of the machine. At the same time, we should also pay attention to the regular maintenance and overhaul of the equipment to extend the service life of the equipment.
