1. The operator should not wear gloves. When blockage occurs, it is strictly prohibited to put the hand into the stuffing bucket.
2. Do not stop immediately after the end of the work, should idling for 3 minutes, so that the material in the machine is completely discharged. Cleaning and maintenance should be carried out after shutdown.
3. After 300 hours of operation of the organic fertilizer dryer, the bearing should be cleaned and the oil replaced.
4. After the organic fertilizer dryer is turned on, first idling the equipment for 3 minutes to check whether the running sound is normal. Only when the machine is running smoothly can it work.
5. In the work of the organic fertilizer production line, we should always pay attention to the operation of the dryer, and the feeding should be uniform to prevent blocking the stuffy car and not to overload the work for a long time.
6. When the organic fertilizer dryer is running, the operator shall not leave the unit, nor shall the machine be dismantled during operation to observe the working conditions in the drying room, and the maintenance tools shall not be placed on the machine or filled
Here.
7 The fixed operation of the organic fertilizer dryer should be fixed on the cement basis. If the working place is often changed, the slime burner and the motor should be installed on the frame made of Angle iron. If the organic fertilizer dryer is powered by a diesel engine, the power of the two should be matched, that is, the power of the diesel engine is slightly greater than the power of the dryer, and the pulley groove of the two should be consistent. The outer ends of the pulley should be on the same plane.
8. Before starting the organic fertilizer dryer, it is necessary to check whether the connection bolts of each part of the unit are fastened, whether the tightness of the transmission belt is appropriate, and whether the power cord is good. Motor shaft and dryer shaft are parallel.
