When the temperature of the organic fertilizer equipment abnormally rises, it may be a signal of equipment failure or changes in operating conditions, and it needs to be dealt with promptly to avoid equipment damage and production interruption. The following are the specific steps for dealing with the abnormal temperature increase of organic fertilizer equipment:
1. Immediately stop the machine for inspection: Once an abnormal increase in the equipment temperature is detected, the operation of the equipment should be immediately halted to prevent damage due to high temperatures. Make sure the equipment is completely powered off to prevent electrical faults from causing fires or other safety accidents.
2. Check the cause of abnormal temperature: If the organic fertilizer production line is equipped with a cooling system, check whether the cooling system is operating normally. Check whether the oil level of the lubricating oil is normal and whether the lubricating oil has deteriorated or is insufficient. Insufficient or deteriorated lubricating oil may lead to poor lubrication of the equipment, thereby causing high temperatures.
3. Take targeted measures: Replenish or replace the lubricating oil. If the lubricating oil is insufficient or deteriorated, it should be replenished or replaced immediately. If the cooling system is clogged or the cooling water is insufficient, the cooling system should be cleaned or the cooling water replenished. If the ventilation opening is blocked, it should be cleared to ensure the unobstructed ventilation system. If the equipment is overloaded, the load of the equipment should be appropriately adjusted to avoid long-term overloading operation.
4. Restart the equipment: After the problem is solved, gradually restore the operation of the equipment. First, run the equipment at a low speed, observe the temperature changes, and ensure that the equipment operates normally before returning to the normal speed.
Through the above steps, the problem of abnormal temperature rise in organic fertilizer equipment can be effectively dealt with, reducing the risk of equipment damage and ensuring the smooth progress of the production process.
