Before the operation of the rotary drum granulator, a series of inspection steps are essential. These steps not only ensure the normal operation of the organic fertilizer production line, but also prevent possible accidents. Here is a detailed guide to these steps:
1. Confirm the status of organic fertilizer equipment: First of all, check the various parts of the drum granulator, including the drive system, bearings, seals and fasteners, etc., to ensure that they are in good working condition.0
2. Check the lubrication system: check the amount of lubricating oil and grease to make sure they are at the right level. At the same time, it is also necessary to check whether the operation of the lubrication system is normal, without leakage and blockage.
3. Check the tightness: check all the sealed areas of the equipment, including the feed port, the discharge port and the connection part, to ensure that there is no leakage.
4. Check the temperature: Check the temperature of each component, especially the bearing and drive part, to ensure that there is no overheating.
5. Check the material: confirm that you will be dealing with the material suitable for the drum granulator. This may include screening the material to remove impurities and particles that are too large or too small.
6. Check the power and air sources: Verify that the power and air sources required for your operation are available and that the device is properly connected to them.
7. Check safety facilities: Ensure that all safety facilities are properly installed, such as shields, safety valves and emergency stop switches.
